gzterridy@gzdy.net.cn

+8615811873450

Product Categories
Contact Us
Address: A456, Floor 4, Chaolian Business Bldg. A, No.838, 105 National Road, Dashi Street Panyu Dist., Guangzhou, Guangdong, China (Mainland)
TEL: 86-18001272887
FAX: 86-20-34523626
Email: dayu@gz-dy.cn
Website: www.dywaterproof.com
Home > Project > Content
Construction process of Pre-laid Self-Adhesive Waterproofing Membrane Feb 02, 2018

Construction process of Pre-laid Adhesive Waterproofing Membrane


Construction Steps:

Required instruments

Construction tools preparation

PVZX7764.JPG



Construction process:

1. Clean base course

clean 2.png


clean.png

 

2. Pre-laying the membrane for a approprite position                                                                                 

3. Roll the membrane from two ends towards middle point

Lay membrane.png

4Cut open isolating film of the membrane ( don’t tear open the parts of overlapped edges)                     

5. Tear off the isolating film and pave the membrane forwardly(A man behind use scraper blade to get ride of the air)

6Tear off isolating film on overlapped parts of upper and lower surface      

微信图片_20180202092815.png


2.png

7Press the overlapped parts tightly

微信图片_20180202093125.png


微信图片_20180202093830.png


自粘带砂底板完工图.png





Previous: No Information

Next: Guangdong Silver Kui Hospital